ZH1114 Series

Voltage selector for multi-system railway vehicles

Sensors and high-voltage controlgear

With its voltage and frequency analyzer ZH1114 Schaltbau meets the
requirements of modern cross-border traffic.

The ZH1114 identifies the voltage ranges according to UIC 550 and
operates as electronic control device for the Schaltbau change-over unit, which adapts the individual loads of the railway vehicle to the different detected supply voltages. Additionally, the correct electrical configuration is being tested by the device.

Features

  • Identification of UIC 550 compliant voltages (1 kV 16 ⅔ Hz / 1.5 kV 50 Hz / 1.5 kV DC / 3 kV DC) and 3 kV 50 Hz
  • Meets insulation requirements for 3 kV DC (UIC 550) acc. to EN 50124-1:2001+A1
  • Customised setting of the device via PC – same hardware for different configurations
  • Application: Adapting the electrical configuration of RIC passenger
    coaches to the detected supply voltage

Ordering code

ZH1114

Specifications

ZH1114
Input voltage range to UIC 550680 ... 3,000 V AC, 16 2/3 ... 50 Hz; 900 ... 3,000 V DC
Measurement rangeup to 5 kV AC, 16 2/3 ... 50Hz; up to 6 kV DC
Control voltage US24 V
Rated operating current<300 mA
Power consumption without applied high voltage90 mA
Power consumption with applied high voltage180 mA
Temperature range-25 °C ... +85 °C
Vibration, ShockIEC 61373
Ingress protection rating, IEC 60529IP20
Dimensions (L x W x H)273 x 201 x 178 mm
StandardsEN 50124, EN 50128, EN 50155
Показать все технические характеристики

Related Downloads

Флаер F182
ZH1114 — селектор напряжения для транспортных средств, работающих на нескольких напряжениях