ZH842H Series

Solid-state high-voltage signalling relay

Sensors and high-voltage controlgear

The ZH842 H Series solid-state high-voltage sensor signals high voltage applied to the train line. The device supplies electrical loads, which for the conservation of battery power are only operated when high voltage is being applied, with control voltage.

Mode of operation: The ZH842 H switches on a potential-free relay contact as long as the high voltage at the input terminals exceeds the signalling voltage.

Features

  • Identification of UIC 550 compliant voltages (1 kV 16 ⅔ Hz / 1.5 kV 50 Hz / 1.5 kV DC / 3 kV DC) and 3 kV 50 Hz
  • Meets insulation requirements for 3 kV DC (UIC 550) according to EN 50124-1:2001+A1
  • Low stand-by consumption
  • Potential-free switching output

Stock items

ZH842H-24V
ZH842H-36V
ZH842H-110V

Specifications

ZH842H
Input voltage range to UIC 5500 ... 3,000 V AC, 16 2/3 ... 50 Hz; 0 ... 5,000 V DC
Threshold voltage>670 V AC, 16 2/3 ... 50 Hz; >610 V DC
Control voltage US24/110 V acc. to UIC
Power input from battery<3 mA, typical
Max. switching capacity; Potential-free relay contactU = 24 V DC: 4.0 A; U = 110 V DC: 0.2 A
Temperature range-40 °C ... +85 °C
Vibration, ShockIEC 61373
Ingress protection rating, IEC 60529IP20
Dimensions (L x W x H)160 x 185 x 38 mm
Show all data

Related Downloads

Flyer F183
ZH842 - Solid-state high-voltage signalling relay
/en/products/electrics-for-rolling-stock/thank-you-kopie/ZH842 – Solid-state high-voltage signalling relayElectrics for rolling stock

Your quick contact to us!

If you have any questions, suggestions or other concerns, please let us know. Please fill out our short contact form.