ZH1114 Series

Voltage selector for multi-system railway vehicles

Sensors and high-voltage controlgear

With its voltage and frequency analyzer ZH1114 Schaltbau meets the requirements of modern cross-border traffic.

The ZH1114 identifies the voltage ranges according to UIC 550 and operates as electronic control device for the Schaltbau change-over unit, which adapts the individual loads of the railway vehicle to the different detected supply voltages. Additionally, the correct electrical configuration is being tested by the device.

Features

  • Identification of UIC 550 compliant voltages (1 kV 16 ⅔ Hz / 1.5 kV 50 Hz / 1.5 kV DC / 3 kV DC) and 3 kV 50 Hz
  • Meets insulation requirements for 3 kV DC (UIC 550) acc. to EN 50124-1:2001+A1
  • Customised setting of the device via PC – same hardware for different configurations
  • Application: Adapting the electrical configuration of RIC passenger
    coaches to the detected supply voltage

Ordering code

ZH1114

Specifications

ZH1114
Input voltage range to UIC 550680 ... 3,000 V AC, 16 2/3 ... 50 Hz; 900 ... 3,000 V DC
Measurement rangeup to 5 kV AC, 16 2/3 ... 50Hz; up to 6 kV DC
Control voltage US24 V
Rated operating current<300 mA
Power consumption without applied high voltage90 mA
Power consumption with applied high voltage180 mA
Temperature range-25 °C ... +85 °C
Vibration, ShockIEC 61373
Ingress protection rating, IEC 60529IP20
Dimensions (L x W x H)273 x 201 x 178 mm
StandardsEN 50124, EN 50128, EN 50155
Show all data

Related Downloads

Flyer F182
ZH1114 - Voltage selector for multi-system railway vehicles
/en/products/electrics-for-rolling-stock/thank-you-kopie/ZH1114 – Voltage selector for multi-system railway vehiclesElectrics for rolling stock

Your quick contact to us!

If you have any questions, suggestions or other concerns, please let us know. Please fill out our short contact form.