K series 5-position contact assembly

State-of-the-art toggle switches for driver‘s desks of rail vehicles

Toggle switch K – 5‑position contact assembly
Version blue illuminated with standard lever and toggle latches for mounting
Toggle switch K – 5‑position contact assembly
Version blue illuminated with standard lever with T-handle and screwing device for mounting
Toggle switch K – 5‑position contact assembly
Version not illuminated with special handle cylinder short and toggle latches for mounting
Toggle switch K – 5‑position contact assembly
Version not illuminated with special handle and toggle latches for mounting
Toggle switch K – 5‑position contact assembly
Version not illuminated with special yellow ball handle and toggle latches for mounting
Toggle switch K – 5‑position contact assembly
Version blue illuminated with special ball handle and screwing device for mounting
<
>

Schaltbau toggle switches – desk components for the demanding use in traffic engineering.

Series K toggle switch assemblies are equipped with up to 8 snap-action switches type S880. With these switching elements 3 and 5 switch settings can be realised. Following UIC 612 and technologically state-of-the-art they are compatible to the P Series toggle switches as far as their momentary and maintained operation is concerned.

Features

  • Handle styles: Special, ball or T-handle, standard
  • Action: 3 and 5 position, momentary and maintained operation,
    compatible to Schaltbau’s P Series toggle switches
  • Central Fixing: Elegant switch mount with illuminated ring used
    as function indicator or for night design. Easy to mount.
  • Rugged and durable: Solid and completely sealed plastic
    housing. Cage clamp terminals at the bottom of the switch
    with Deutsche Bahn approval.

Application

K Series toggle switches are typically used as components of driver’s
desks of rail vehicles but also for cranes and cable cars.

By selecting this option you finish the configuration.

Finish
Cancel

Specifications

K series - 5-position contact assembly
Switch settingsConfigurable at -32°/-16°/0/+16°/+32°
ActionMomentary / maintained / blocked
Switching elementSnap-action switch S880 (for specifications refer to catalogue D80.en)
# of switching elements8 max.
Conv. thermal current Ith6 A
Nominal voltage Un24 V or 110 V
Utilization categoryDC 13, 24 V / 2 A
Overvoltage categoryOV2
Illumination, optionalWhite / yellow / red / green / blue
Terminals*Standard cage clamp
Ingress protection rating, IEC 60529IP40 below mounting plate, IP50 above
Mechanical endurance>500,000 operating cycles
Mounting styleCentral fixing for mounting hole Ø 30.5 mm, Thickness of desk panel 2 ... 9 mm
Dimensions (L x W x H)68 x 37 x 77.5 mm
Temperature range-40 °C ... +85 °C
StandardsUIC 612, EN50155, EN50124-1, IEC60068-2-1, IEC60068-2-2, IEC60068-2-38, IEC60529, IEC61373
Fire protection standardsNF F16-101/-102, DIN 5510-2
Show all data

What do you want to do?

Do you have questions about this product?Toggle switches K – 5 position contact assemblyRailway-control devicesDo you have questions about this product?
2978Bookmark product
What can we do for you?*

We gladly inform you about our current privacy policy.

Railway-control devices
Toggle switches K – 5 position contact assembly