K series 3-position contact assembly

State-of-the-art toggle switches for driver‘s desks of rail vehicles

Toggle switch K – 3‑position contact assembly Version blue illuminated with standard lever and toggle latches for mounting
Toggle switch K – 3‑position contact assembly Version blue illuminated with standard lever with T-handle and screwing device for mounting
Toggle switch K – 3‑position contact assembly Version not illuminated with special handle cylinder short and toggle latches for mounting
Toggle switch K – 3‑position contact assembly Version not illuminated with special handle and toggle latches for mounting
Toggle switch K – 3‑position contact assembly Version not illuminated with special yellow ball handle and toggle latches for mounting
Toggle switch K – 3‑position contact assembly Version blue illuminated with special ball handle and screwing device for mounting

Schaltbau toggle switches – desk components for the demanding use
in traffic engineering.

Series K toggle switch assemblies are equipped with up to 8 snap-action switches type S880. With these switching elements 3 and 5 switch settings can be realised. Following UIC 612 and technologically state-of-the-art they are compatible to the P Series toggle switches as far as their momentary and maintained operation is concerned.

Features

  • Handle styles: Special, ball or T-handle, standard
  • Action: 3 and 5 position, momentary and maintained operation,
    compatible to Schaltbau’s P Series toggle switches
  • Central Fixing: Elegant switch mount with illuminated ring used
    as function indicator or for night design. Easy to mount.
  • Rugged and durable: Solid and completely sealed plastic
    housing. Cage clamp terminals at the bottom of the switch
    with Deutsche Bahn approval.

Application

K Series toggle switches are typically used as components of driver’s
desks of rail vehicles but also for cranes and cable cars.

Specifications

K series 3-position contact assembly
Switch settingsConfigurable at -32°/-16°/0/+16°/+32°
ActionMomentary / maintained / blocked
Switching elementSnap-action switch S880 (for specifications refer to catalogue D80.en)
# of switching elements8 max.
Conv. thermal current Ith6 A
Nominal voltage Un24 V or 110 V
Utilization categoryDC 13, 24 V / 2 A
Overvoltage categoryOV2
Illumination, optionalWhite / yellow / red / green / blue
Terminals*Standard cage clamp
Ingress protection rating, IEC 60529IP40 below mounting plate, IP50 above
Mechanical endurance>500,000 operating cycles
Mounting styleCentral fixing for mounting hole Ø 30.5 mm, Thickness of desk panel 2 ... 9 mm
Dimensions (L x W x H)68 x 37 x 77.5 mm
Temperature range-40 °C ... +85 °C
StandardsUIC 612, EN50155, EN50124-1, IEC60068-2-1, IEC60068-2-2, IEC60068-2-38, IEC60529, IEC61373
Fire protection standardsNF F16-101/-102, DIN 5510-2
Show all data

Related Downloads

Catalogue F112
Series K - Toggle switches for drivers’ desks of rail vehicles
Manual F112
F, L, P, K series Toggle switches for drivers’ desks of rail vehicles Installation and maintenance instructions
/en/products/electrics-for-rolling-stock/thank-you-kopie/Toggle switches K – 3 position contact assemblyRailway-control devices

Your quick contact to us!

If you have any questions, suggestions or other concerns, please let us know. Please fill out our short contact form.