ZH1500 series

Disconnecting and earthing device for single and multi-system rail vehicles

ZH1500 series Disconnecting and earthing device

The equipment is designed for all UIC voltages, from 1 kV AC up to 3 kV DC.
The equipment usually is built in behind a door und connected to that door via a rod. Opening of the door pulls the rod and disconnects the connection between the train bus bar and the power supply. The power supply is then connected to ground to allow safe access to the switch gear. This grounded state may be secured with up to 3 locks to prevent a second person to unintentionally connect the power supply again.

The contact system is designed for switching without load but allows some emergency switchings. Under normal operating conditions the main contactor “energy” is being switched off prior to the opening of the contacts via a door switch.

Features

  • Disconnecting and earthing device in accordance with the applicable
    safety regulations
  • Suitable for all UIC voltages
  • Insulation for operating voltages up to 5 kV DC max.
  • Standardised version with the following advantages:
    • Can be mounted on the left-hand, right-hand, or bottom side
    • Vertically mounted for switchgear cabinets
    • Horizontally mounted for power compartments
    • Readily available for the project start

Stock items

ZH 1500 D1
ZH 1500 D2
ZH 1500 D2 R
ZH 1500 D2 S
ZH 1500 D2 SK
ZH 1500 D6
ZH 1600 D4

Specifications

Nominal voltage Unom Frequency f, Conv. thermal current Ith
     
ContactUnomfIth
Disconnecting contact1.0 kV AC16 ⅔ Hz150 A
1.5 kV AC50 Hz100 A
1.5 kV DC—-100 A
3 kV DC/Umax. 5 kV—-50 A
Earthing contact3 kV DC/Umax. 5 kV—-50 A
Auxiliary contacts380 V AC50 Hz16 A
110 V DC—-16 A

Specifications

ZH1500
Maximum load250 kW
Number, configurationOptional module: 2 x S800 SPDT
Blowout methodArc chute, permanent-magnetic blowout
Insulation, testing voltage14 kV
Cycles, mechanical lifeapprox. 10,000, 30 years min.
Temperature range-40 °C ... +85 °C
Mounting orientationvertical, horizontal
Shock resitance (IEC 61373, IEC 60068)3 g, 30 ms
Vibration resistance (IEC 61373, IEC 60068)0.35 g at 20 ... 150 Hz
Ingress protection rating, IEC 60529IP00
Dimensions (W x H x T)145 x 415 x 470 mm
Weight11 kg
Show all data

Related Downloads

Catalogue F186
ZH1500 - Disconnecting and Earthing Device
/en/products/electrics-for-rolling-stock/thank-you-kopie/ZH1500 – Disconnecting and earthing device for single and multi-system rail vehiclesElectrics for rolling stock

Your quick contact to us!

If you have any questions, suggestions or other concerns, please let us know. Please fill out our short contact form.